Cornelius 000 PLUS Manuál stáhnout pdf (Strana 8)

CLASSIC 1000

REMOTE COOLER

4. MAINTENANCE INSTRUCTIONS

4.1 AIR COOLED MODEL

1. Check that the water level in the water bath is up to

the overflow.

2. Check and clean the Condenser fins. Dirt and dust

can block the air vents in the condenser, severely

reducing the effectiveness of the refrigeration

system.

3. Check that there is adequate air flow through the

unit, ensuring enough space all round and that there

are no obstructions in the front of the air flow vents.

4. Check the condition and the effectiveness of the

Python insulation.

5. Check the Python for correct water recirculation.

6. At regular intervals, to be determined by the owner

and/or the user, the cooler should be checked for

electrical safety.

4.2 WATER COOLED MODEL

1. Check that the water level in the water bath is up to

the overflow.

2. Check that the Discharge Unit fan is working and

that there are no obstructions or blockages of the air

flow vents.

N.B. The fan is controlled by a thermostat mounted

within the Base Unit. It may switch the fan off

when air into the discharge unit drops below

approx 12°C.

3. Check and clean the heat exchanger fins on the

Discharge Unit. Dirt and dust can block the air vents

in the heat exchanger, severely reducing the

effectiveness of the refrigeration system.

4. Check the condition and the effectiveness of the

Python insulation.

5. Check the Python for correct water recirculation.

6. At regular intervals, to be determined by the owner

and/or user, the cooler should be checked for

electrical safety.

7. Check the glycol lines are not kinked or crushed.

Check for leaks.

8. Check the level of coolant (Water/Glycol) in the

reservoir and re-fill as necessary with a 30% Glycol

70% Water mix.

▼

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Komentáře k této Příručce

Žádné komentáře

Cornelius 000 PLUS Manuál Strana 8

Komentáře k této Příručce

Související produkty a manuály pro ne Cornelius 000 PLUS