Cornelius IWC322 Technické informace stáhnout pdf (Strana 19)

I-Series Ice Machine Training Manual

- 15 -

5.5 Suction Line Thermistor Replacement

NOTE: The following procedure may be the easiest, but, it is not the only way

replace the thermistor.

1. Unplug the ice machine and remove the top and front panels.

2. Remove plastic rivets from the

electrical box mounting bracket using a

punch and side cutters. Save the rivets

for reinstallation.

3. Remove and retain four screws on top

of bracket and two on gauge port bracket.

4. Move electrical box out of the

way and cut insulation from

around the thermistor.

5. Replace thermistor. Be sure to clean the surface

of the suction line.

Punch thru

center of rivet

Side cutters to lift

rivets Do Not Cut

Remove 2 screws

Remove 4 screws

Thermistor

Groove

in line

Thermistor

SYSTEM DETAILS

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 57 58

Žádné komentáře

Cornelius IWC322 Technické informace Strana 19